A few days back I posted pictures of this plane I found in Cookeville, TN.
Which breaks down to this collection of parts:
Monday night, a few of us were sitting around looking at the plane and trying to figure out who made the blade. None of us could read the logo on the blade. The best we could do was the Cast Steel and Sheffield.
I took three more pictures with various angles of raking light. Are any of these useful?
or this one?
If any of you have any ideas from whence this came, feel free to share.
Thanks
rootertooterwren said:
Try Jim Hendricks over at Unplugged woodworkers on Facebook he is my go to guy for any infor on planes of all types.
jheimbecher said:
Have you tried doing a rubbing? I find that thin paper and charcoal work the best because they only require a light touch.
jheimbecher said:
Have you tried doing a rubbing? Sometimes that can pick up details that are hard to discern with the naked eye.
Sylvain said:
Puting a paper on it and rubbing a soft pencil on the paper might help.
Sylvain.
Bill said:
Looks to me like it could be an Isaac Greaves, although there’s no emblem in the center. Here’s one for comparison: http://www.sheffieldhistory.co.uk/forums/uploads/monthly_07_2010/post-188-093781100%201278529424.jpg
chris987654321 said:
Definitely looks like a cooper’s plane. Looks like the bottom is rounded front to back and side to side? If so it is an inside shave used to clean up the inside of a barrel.
tenpennyguy said:
Besides a rubbing, a casting or an impression in playdough, then filling up the mould with a contractsing colour, might help capture some of the letters
ctregan said:
Have you tried an Ouija board? It might be possible to contact the spirits of those that used the plane years ago.
rootertooterwren said:
What about smoke printing, I saw a post on Face book the other day. It showed the steps and the results.
ctregan said:
Ibbotson, Sheffield
http://www.ebay.tv/sch/Tools-Hardware-Locks-/13849/i.html?_sop=15&_nkw=ibbotson&_frs=1